BACK CONNECT BIMETAL THERMOMETER
Reotemp’s Bimetal Thermometers offer dependable and precise temperature monitoring without the need for electricity or wiring. The Industrial Grade is available in stock, while the Process Grade can be tailored to specific requirements. Back Connect Thermometers are well-suited for obtaining local, eye-level temperature readings in various process applications. These thermometers offer the convenience of recalibration with a simple turn of the calibration screw located on the back of the dial.
Head Assembly
A large selection of RTD Head Assemblies featuring explosion proof, corrosion resistant, LED Display, and many other head options. Can be configured with a HART or 4-20 mA transmitter.
MODEL W FIELD MOUNTED HART TEMPERATURE TRANSMITTER
The REOTEMP Model W Explosion Proof Field Mounted HART Temperature Transmitter features a local display, HART compatibility, and a 4-20mA output. The field mounted transmitter is available as a complete RTD or thermocouple assembly customized to your process.
THREADED THERMOWELLS
Reotemp Threaded Thermowells make it possible to remove an instrument without dropping pressure or losing contents of the process. Thermowells also protect the instrument from getting bent by the process media. Threaded thermowells are perfect for applications that require infrequent replacement and are commonly installed on smaller pipes or vessels. They are best suited for non-corrosive media. Reotemp threaded thermowells are machined from solid bar stock.
4.5” INDUSTRIAL PROCESS GAUGE
REOTEMP’s Series PT45P process gauge is designed to withstand corrosive atmospheres and media, pulsation and vibration; a very rugged gauge engineered for the process industries. The solid front and blowout back provides a high degree of user safety. Note: For highly-corrosive, high-temperature, or severe service applications a diaphragm seal is recommended.
TA INDUSTRIAL PRESSURE TRANSMITTER
Accuracy NLH at 77°F: ±0.25% of spanInput: 11-28 VDC (4-20mA, 0-5V), 15-32 VDC (0-10V)Temperature:Effect: ±0.02% FS/°F (>1 Bar), ±0.03% FS/°F (>1 Bar)Media: -40 to 257°FStorage: -40 to 176°F (Hirschmann DIN A, M12), -4 to 176°F (Cable Type – PE)Weight: ≤9.5 oz.Environmental Rating: IP65 (Hirschmann, M12), IP68 (Cable)
READED OFFLINE WELDED DIAPHRAGM SEALS
Reotemp’s Threaded Offline Welded Diaphragm Seals are designed with an upper and lower housing bolted together with a diaphragm welded to the upper housing. This removable design allows for easy cleanout of the seal chamber, while still maintaining the system fill. The threaded offline diaphragm seal can be adapted to fit almost any pressure instrument and process application.
SINGLE VALVE BLOCK & BLEED
REOTEMP’s G1 single valve block and bleed allows users to isolate pressure to their instrument, bleed off excess process, and remove an instrument without disturbing or shutting down the system. A variety of options are available to suit just about every application.